AUDIOLINE WAVE 10X Technical Information PDF herunterladen (Seite 95)

e. Go to step 7 on page 87 to install the

replacement microprocessor.

5. Locate the secondary microprocessor socket on the

system board. (See the illustration in “System Board”

on page 96.)

6. Remove the terminator card in the secondary

microprocessor socket.

7. Touch the static-protective package containing the

new microprocessor to any

unpainted

metal surface in

the server; then, remove the new microprocessor.

8. Press in on the retainer tabs until they click.

Note

For the location of the retainer tabs, see the

illustration in step 4b on page 86.

9. Align the new microprocessor with the appropriate

connector (primary or secondary) on the system

board and slide it into the guides. Press the

microprocessor down until it snaps into place and is

fully seated in the connector.

10. Pull outward on the retainer tabs.

IBM Netfinity 3500 - Type 8644 87

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 151 152

Keine Kommentare

AUDIOLINE WAVE 10X Technical Information Seite 95