AUDIOLINE WAVE 10X Technical Information PDF herunterladen (Seite 51)

return to the previous menu. Also, you can press the F5

key to switch between color and monochrome modes (if

the monitor permits). To change the settings of the

displayed items, such as Channel A or Channel B, follow

the directions on the screen. Then, press Enter.

SCSISelect Utility Program Choices: The

following choices appear on the SCSISelect Utility program

menu:

 Configure/View Host Adapter Settings

 SCSI Disk Utilities

Configure/View Host Adapter Settings:

To view or

change the SCSI controller settings, select

Configure/View Host Adapter Settings and follow the

directions on the screen.

Note

On this menu, the SCSI controller is referred to as the

Host Adapter.

This menu has the following choices:

 Host Adapter SCSI ID

The default SCSI ID of the SCSI controller is

not change this value.

 SCSI Parity Checking

The default value is

Enabled.

Do not change this

value.

 Host Adapter SCSI Termination

The default value is

Low On / High On.

Do not

change this value.

 Boot Device Configuration

Select this choice to configure startable device

parameters. Before you can make updates, you must

know the ID of the device whose parameters you

want to configure.

The default startup (boot) SCSI ID is 0 for an internal

SCSI hard disk drive in Channel A.

 SCSI Device Configuration

Select this choice to configure SCSI device

parameters. Before you can make updates, you must

know the ID of the device whose parameters you

want to configure.

Note

When the Maximum Sync Transfer Rate is set

to 40.0, this value represents the transfer rate for

UltraSCSI devices. When this value is set to

20.0, it represents the transfer rate for Fast SCSI

devices.

 Advanced Configuration Options

IBM Netfinity 3500 - Type 8644

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 151 152

Kommentare zu diesen Handbüchern

Keine Kommentare

AUDIOLINE WAVE 10X Technical Information Seite 51

Kommentare zu diesen Handbüchern