AUDIOLINE WAVE 10X Technical Information PDF herunterladen (Seite 122)

Symptom FRU/Action

The monitor goes blank

when some application

programs start.

1. Check all cable

connections.

2. Verify that the graphics

adapter is correctly

installed in slot 1, the

Accelerated Graphics

Port (AGP).

3. Verify that the device

drivers necessary for

the applications are

installed.

The monitor works when

you power-on the system,

but goes blank after some

period of server inactivity.

Note

The Advanced Power

Management (APM)

feature is not

supported.

1. If enabled, disable

the Advanced Power

Management (APM)

feature setting in the

Configuration/Setup

Utility program.

Screen flickers.

Attention

Using a resolution or

refresh rate that is not

supported by the

monitor might damage

it.

1. Set monitor to

highest,

noninterlaced refresh

rate supported by the

monitor and

controller.

2. Monitor

3. Video Adapter

Wavy, unreadable, rolling,

distorted screen, or screen

jitter.

If the monitor self-tests

show that the monitor is

working properly, verify that:

1. Check the location of

the Monitor.

2. Verify that an IBM

monitor signal cable is

properly connected.

3. Verify that the monitor

is not trying to run at a

higher refresh rate than

supported.

1. Monitor

2. Video Adapter

Wrong characters appear on

the screen.

1. Video Adapter Cable

2. Video Adapter

114 IBM Netfinity Servers HMM

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 151 152

Kommentare zu diesen Handbüchern

Keine Kommentare

AUDIOLINE WAVE 10X Technical Information Seite 122

Kommentare zu diesen Handbüchern