AUDIOLINE WAVE 10X Technical Information PDF herunterladen (Seite 35)

Plug and Play Control:

Select this choice to control

features associated with Plug and Play devices, such as

Set Device Mode, Address Decode, and Plug and Play

Operating System.

Select Set Device Mode to control the device node.

When you change this value to Disabled, the system is

unable to update the configuration during POST.

Processor Control:

Select this choice to control

features associated with the microprocessors, such as

Processor 0 ID and Processor Updating.

ISA Legacy Resources:

Plug and Play

is a

configuration method that makes expanding the server

easier. Support for Plug and Play is built into the system

board of the server.

If an adapter is Plug and Play, there are no switches or

jumpers that must be set on the adapter. A Plug and Play

adapter comes with configuration specifications set in

memory to provide installation information to the server

during startup. When you install or remove Plug and Play

adapters, this information is interpreted by the BIOS, which

supports Plug and Play technology. If the required

resources are available, the BIOS software automatically

configures the adapter around the resources already in use

by other devices.

Most adapters designed for PCI slots are Plug and Play

devices that are auto-configuring. However, many ISA

adapters are not Plug and Play devices. These adapters

are known as

legacy

adapters. If you install a legacy

adapter, you must manually configure it by setting switches

or jumpers on the adapter, and by allocating or reserving

the system resources that the adapter will use.

Note

See “Resolving Configuration Conflicts” on page 41

for information about handling resource conflicts.

Select ISA Legacy Resources to identify the available

system resources:

 Memory

 I/O ports

 DMA

 Interrupt

Note

The menus do not contain resources that are used by

the system or by previously installed Plug and Play

adapters.

IBM Netfinity 3500 - Type 8644 27

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 151 152

Kommentare zu diesen Handbüchern

Keine Kommentare

AUDIOLINE WAVE 10X Technical Information Seite 35

Kommentare zu diesen Handbüchern