AUDIOLINE WAVE 10X Technical Information Seite 81
- Seite / 152
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Installing or Removing Drives in Bays 1
through 4: Use the following procedure for installing a
drive in bays 1 through 4. If you want to remove a drive,
skip steps 4 through 6 on page 73, and step 8 on
page 73.
Notes
See “Drive Specifications” on page 66 for the
drive types and sizes that you can install in bays
1 through 4.
You might need to disconnect cables from drives
that are already installed in the server.
1. Read “Preinstallation Steps (All Bays)” on page 70
and the instructions that come with the option.
2. Read “Termination Requirements” on page 69.
3. Remove the server cover (see “Side Access Cover”
on page 94).
4. The server comes with a tray installed in bay 2. If
you are installing a 5.25-inch drive in bay 2, you must
first remove the tray. To do this, remove the four
screws on the bottom of the tray.
5. If a tray is attached to a drive that you intend to
install, you must remove the tray before installing the
drive. Follow the instructions in the documentation
that comes with the drive.
6. Using the instructions that come with the drive,
together with these instructions, verify that any
switches or jumpers on the drive are set correctly.
Change the settings if necessary. For information
about termination requirements, see “Termination
Requirements” on page 69.
7. Remove the upper drive bracket. See step 3 on
page 71.
8. Touch the static-protective package containing the
new drive to any
unpainted
metal surface; then,
remove the drive.
Attention
To ensure that the drive functions properly, do
not overtighten the screws.
9. If you are installing a drive in bay 1, 3, or 4, go to
step 10 on page 74.
If you are installing a 3.5-inch drive in bay 2:
a. Loosen the screws on the sides of the tray; then,
place the drive on the tray.
Note
These are captive screws; therefore, they
cannot be removed.
IBM Netfinity 3500 - Type 8644 73
- S05L-1908-01 1
- About This Supplement 5
- Online Support 5
- Contents 7
- General Checkout 12
- Diagnostics 13
- Diagnostic Test Programs 14
- Power-on Self-Test (POST) 15
- POST Beep Codes 16
- Error Messages 16
- Symptom-to-FRU Index 16
- Features 21
- CD-ROM Emergency Eject 24
- Configuration Overview 24
- Configuration/Setup Program 25
- Select Option: 27
- ISA Legacy Resources: 35
- Interface BIOS Mode: 36
- Ethernet Cable Specifications 39
- 100BASE-TX Link Segments 40
- Ethernet Connection Problems 42
- Messages 43
- Undetermined Problems 46
- I999030X) 47
- Power Supply 47
- SCSISelect Utility 50
- Enabled 51
- Low On / High On 51
- SCSI Disk Utilities: 52
- Security Options 53
- Server Configuration 54
- Specifications 55
- Locations 57
- Adapters 58
- Expansion-Slot Screw 60
- Card Retainer 60
- Administrator Password Switch 61
- Battery 62
- CD-ROM Drive 62
- Eject/Load Button 63
- Emergency-Eject Hole 63
- CD-ROM Drive 63
- In-Use Light 63
- Completing the Installation 64
- Connecting External Options 66
- Controls 69
- Ethernet Connector 70
- 12345678 12345678 71
- Feet (Stabilizing) 72
- Internal Drives 73
- ribbon cables 75
- SCSI Drives 76
- SCSI Logical Unit Number: 77
- Termination Requirements: 77
- Input/Output Connectors 86
- Keyboard and Mouse Connectors 88
- Memory Connectors 89
- Microprocessors 91
- Parallel Port Connector 97
- ROM Operation Mode Switch 98
- SCSI Connectors 99
- Assignments 100
- Serial Port Connectors 101
- Side Access Cover 102
- Status Indicators 103
- System Board 104
- Clear CMOS Request 105
- Microprocessor Speed Switches 107
- Knockouts 109
- Universal Serial Bus Ports 111
- Video Port Connector 112
- Symptom-to-FRU Index 113
- No Beep Symptoms 113
- Beep Symptoms 113
- IBM Netfinity Servers HMM 114
- POST Error Codes 116
- Diagnostic Error Codes 120
- Miscellaneous Symptoms 121
- SCSI Messages 126
- Parts Listing 127
- Keyboards 131
- Power Cords 132
- Related Service Information 133
- Safety Information 134
- General Safety 134
- Electrical Safety 135
- Safety Inspection Guide 136
- Handling Electrostatic 138
- Discharge-Sensitive Devices 138
- Grounding Requirements 138
- Battery Notice (Lithium) 139
- Laser Compliance Statement 144
- Send Us Your Comments! 146
- Problem Determination Tips 147
- Trademarks 150
- Part Number: 10L9833 152
- Printed in U.S.A 152
- Sð5L-19ð8-ð1 152
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.039 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern