AUDIOLINE WAVE 10X Technical Information PDF herunterladen (Seite 13)

001 (continued)

2. Readable instructions or the Main Menu.

DID YOU RECEIVE THE CORRECT RESPONSES?

Yes No

002

Go to the “Symptom-to-FRU Index” on page 105.

003

ARE ALL INSTALLED DEVICES IN THE SERVER

HIGHLIGHTED ON THE MODULE TEST MENU OR

HARDWARE CONFIGURATION REPORT?

Yes No

004

The missing device may be defective.

005

Run the Advanced Diagnostics test. If necessary, refer to

“Diagnostics.”

 If you receive an error, go to “Symptom-to-FRU

Index” on page 105.

 If the test stops and you cannot continue, replace the

last device tested.

Diagnostics

Server problems can be caused by the hardware, the

software, or a user error. An example of a user error is

pressing the wrong key on the keyboard.

Notes

 Some hardware and software errors are caused

by configuration conflicts. For information on

handling these situations, see “Resolving

Configuration Conflicts” on page 41.

 When running the diagnostic test programs, a

single problem can cause several error

messages to occur. When this happens, work to

correct the cause of the first error message.

After the cause is corrected, the other error

messages probably will not occur the next time

that you run the tests.

If the hardware is OK and you have not made an error,

you might have a software problem. If you suspect that

you have a software problem, refer to the information that

comes with that software package.

The following tools are available to help identify and

resolve hardware-related problems:

IBM Netfinity 3500 - Type 8644

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 151 152

Keine Kommentare

AUDIOLINE WAVE 10X Technical Information Seite 13