AUDIOLINE WAVE 10X Technical Information PDF herunterladen (Seite 28)

Note

The choices on some menus might differ slightly,

depending on the BIOS version that comes with the

server.

Use the following commands to navigate through the

screens and make selections:

System Summary: Select this choice to display

configuration information, such as the type and speed of

the microprocessor, and the amount of memory.

Changes that you make to configuration settings appear on

this summary screen. You cannot edit the fields on this

screen. If you need to change the configuration settings,

you must make the changes from the applicable menu

choices.

Product Data: Select this choice to view the machine

type and model, the system serial number, the system

board identifier, and the revision level or issue date of the

flash EEPROM.

Devices and I/O Ports: Software recognizes ports

from their port assignments. Each port must have a

unique port assignment. The Configuration/Setup Utility

program normally handles this, but you might have special

hardware or software that requires you to change these

assignments.

Select the Devices and I/O Ports choice to view or

change the assignments for devices and input/output ports.

You can add serial ports by installing a serial adapter in an

expansion slot. See the documentation that comes with

the serial adapter for information about port assignments.

To display or change the port assignments:

1. Select Devices and I/O Ports.

2. Select a device or port. If necessary, press Enter to

display an additional menu.

3. Use the Left Arrow (←) or Right Arrow (→) key to

advance through the settings.

Key Function

↑ ↓ Move between menu items.

← → Toggle between choices for a menu item.

Enter Select an item.

Esc Exit from a menu after viewing or making changes.

F1 Get help on a selected menu item.

20 IBM Netfinity Servers HMM

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 151 152

Keine Kommentare

AUDIOLINE WAVE 10X Technical Information Seite 28